15 years of seal experience
Melbourne-wide fridge & freezer seal replacementTalk to an expert0421 911 222
FOR CAFÉS, SHOPS & COMMERCIAL KITCHENS

Commercial Fridge Seal Quotes: A Checklist for Multiple Cabinets

Prepare a clear commercial fridge seal quote: cabinet IDs, model labels, affected doors, access and fitting scope. A practical checklist for Melbourne venues.

5 min read
Quoting several commercial fridge seals — Fridge Seals Melbourne
SHORT ANSWER

Start here.

For a commercial fridge seal quote, identify each cabinet and each affected door separately. Send a whole-cabinet photo, model label and seal close-up, then list your suburb, access times and any hinge or latch problems. Compare quotes for the same doors, matching method and fitting scope, rather than comparing a bare per-door number.

Count affected doors, not just appliances

A two-door underbench fridge and a single glass-door drinks cabinet are two appliances but three possible seal replacements. Start with a cabinet list so nobody has to guess whether 'three fridges' means three doors or several more.

Give each cabinet a simple location label, such as 'bar drinks fridge' or 'prep bench left'. Use the same label in your photos and enquiry. If several similar cabinets have different model numbers, include each label rather than assuming one part will fit them all.

Copy this cabinet checklist

QuestionWhat it tells you
Cabinet ID and locationExample: prep bench A, left of the sink. Use your own location labels.
Model and serial labelAttach a readable photo. If inaccessible, say so and include a whole-cabinet photo.
Affected doors or drawersState left/right/top/bottom as viewed from the front, and the number needing attention.
Seal conditionRecord splits, loose corners, hard or flattened sections, and where a visible gap appears.
Door and hardwareNote sagging, catching, damaged hinges or a latch that does not engage. Include a photo.
Access and temperature planningList trading hours, a preferred work window and who will manage stock and temperature monitoring.
Close-up of a commercial cabinet door and gasket

Take three useful photos per cabinet

  1. Show the complete cabinetInclude all doors and the surrounding workspace. This helps identify door arrangements and access restrictions.
  2. Photograph the identification labelKeep the model text in focus. Leave the existing seal fitted; model details and the seal's fixing are more useful than measurements alone.
  3. Show the damaged section and fixingTake a close-up of the corner or gap and how the gasket attaches. Do not dismantle the door to get a photo; send what you can safely see.

Compare the scope behind each price

Our commercial guide is on the pricing page, but the confirmed quote is specific to the job. Multiple doors can change the per-door price; a lower advertised figure does not establish that two quotes cover the same work.

  • Does the quote cover the same number of doors and the same cabinets?
  • Is it supply-only or supplied and fitted?
  • How will the correct gasket profile be confirmed before ordering?
  • Are damaged hinges, latches or other parts included, excluded or awaiting inspection?
  • Is the total clear, including travel and any applicable tax?
  • What lead time and work window have been agreed?

Flag a door problem before ordering seals

A new gasket cannot correct every door fault. ICECASA's manufacturer guidance identifies alignment and hinge problems as possible reasons a replacement gasket still leaves a gap. Tell the installer about sagging, catching or a damaged latch before parts are ordered.

We can include suitable commercial hinges, latches and door adjustments in the enquiry. Refrigeration-system faults and temperature failures need the appropriate refrigeration service; a gasket quote is not a diagnosis of the whole appliance.

Agree the visit plan before work begins

Tell us who can provide access and which cabinets are needed during service. Your business should decide how stock and temperature checks will be managed while doors are being worked on. Do not assume every cabinet can remain in use during fitting.

Send the cabinet list together with the photos you have. We confirm the seal requirements, total and lead time before arranging installation.

READY TO CHECK THE FIT?

Get the right seal for your door.

Include your suburb, appliance or cabinet type, the affected door and a whole-appliance photo if you can. A quote request starts the conversation; we confirm the seal, price and lead time before work is booked.

COMMON QUESTIONS

Your questions answered.

Do all commercial fridge doors use the same seal?

No. Identify each cabinet and affected door. Models, profiles and fixing methods can differ, including between cabinets that look similar.

Can I request one quote for several cabinets?

Yes. Send one labelled list of cabinets and affected doors, with photos and your site details. We can scope them together and confirm the total before work starts.

What if I cannot find the model label?

Start with the whole cabinet and seal close-ups. Tell us which label you cannot locate; we will explain what else is needed to check the match.

A PHOTO. A CONVERSATION. A BETTER FIT.

Your fridge.
In expert hands.

Send a photo or talk it through with us. We’ll help find the right seal and give you a clear, free quote.

Carefully matched. Properly fitted.

seal specialist holding a replacement fridge door seal
Call 0421 911 222TextFree quote