Preparation counter
Show the full counter, all doors and each damaged gasket. Include obstructions, surrounding benches and any access restrictions for fitting.
For a Williams prep counter or upright cabinet, keep the model tag and door photos together. Tell us which openings need gaskets and whether the doors drop, catch or fail to close evenly. We check the seal and agreed hardware work, then quote fitting for your Melbourne venue.
Independent seal service · Replacement options confirmed for your model.
Commercial cabinet seals start from $140 a door, supplied and fitted. Priced per door, and cheaper per door when we do several doors in the one visit. We confirm the price for your Williams cabinets once we have the model details and door count. There is no call-out fee.
Williams asks for the product name or code and serial number for support and spare parts. Its FAQ locates the silver tag inside the left-hand door, on the inside wall near the top, or at the cabinet back. Match that tag to the actual cabinet rather than a separate controller or compressor number.
Manufacturer referenceStart inside the left-hand cabinet door and check the inner wall near the top. Williams also lists the back of the cabinet as a possible tag location. Use the manual for your particular unit where its layout differs.
Photograph the complete product code and serial number. A Jade range name or the number of doors helps describe the cabinet, but does not identify the gasket on its own. Keep any letters describing the model variant visible.
Do not move a loaded or connected cabinet to reach a rear tag. Start with accessible photos and any cabinet information from your venue records. For several units, name each cabinet and number doors left to right from the front.
Check the manufacturer’s model guidanceWilliams identifies HJ2SCBA as a two-door sandwich and preparation counter. Its range also includes HJ1SCBA and HJ3SCBA. These are cabinet examples, not evidence that the door gaskets are interchangeable.
Manufacturer referenceManufacturer identification examples. Exact fit, parts availability and lead time are confirmed for your appliance.
A whole-cabinet photo gives each close-up its context. Leave the existing gasket in place while we identify it.
Show the full counter, all doors and each damaged gasket. Include obstructions, surrounding benches and any access restrictions for fitting.
Identify whether it is chilled or frozen storage. Show the whole door and its contact with the frame, plus an intact gasket corner.
Keep a separate tag photo for each cabinet. Similar-looking units may have different seals; a clear list helps us quote the right quantity and fitting window.
A worn gasket and a dropped door can occur together. Show any lifting, catching, uneven contact or visible hinge wear, as well as the rubber damage. Suitable adjustment or separately agreed hinge/latch work may be needed alongside the gasket.
We confirm the seal specification, door count, access and scope before ordering. Independent seal fitting does not include refrigeration, controller or electrical diagnosis. If the cabinet remains warm with a closed door, report that issue separately.
The right rubber is only part of the job. The profile, fixing, corners and door contact all need attention.
Check the model, affected opening, gasket profile and fixing before confirming the replacement.
Prepare and seat the seal, then make suitable door adjustments within the agreed fitting scope.
Check that the door closes evenly and the seal meets the cabinet. Explain any separate issue that needs attention.
Dropped hinges, worn latches or a damaged door can need separate work. We agree any additional hardware work in the quote.
Door hardware and adjustment
A drinks display and an underbench fridge need their own model details, even when they sit in the same kitchen. Give each cabinet a short name and use it with the label, full-door and damaged-seal photos.
Send your suburb, the Williams model details and the affected door photos. We check the replacement specification and confirm the price and expected lead time. Parts are usually ordered after approval, then we arrange your visit.
For several cabinets, include a list of doors, access arrangements and the times that suit your business. Any additional hardware or adjustment work is agreed in the quote.

If a seal fails or lifts, or our fitting causes a problem, call or text us and we come back and fix it at no charge.
Damage after fitting is not covered, such as a seal torn by fingernails, ripped by a spill or a door being forced. This is on top of your rights under the Australian Consumer Law. Read what is covered
We provide independent seal identification, supply and fitting. Brand names describe your appliance; they do not imply manufacturer authorisation or affiliation.
About our commercial fitting serviceCommercial cabinet seals start from $140 a door, supplied and fitted. Priced per door, and cheaper per door when we do several doors in the one visit. We confirm the price for your Williams cabinets once we have the model details and door count.
Williams lists a silver tag inside the left-hand door on the inner wall near the top, or at the back of the cabinet. Check your model’s manual. If the tag is inaccessible, start with a whole-cabinet photo and the details you can reach safely.
Yes. Send the cabinet model and serial tag, number the doors from the front and match each gasket photo to its door. Include your venue, suburb and suitable access times so the quote covers the correct scope.
The quote identifies the agreed seals and fitting work. If photos or assessment show a separate hinge or latch issue, we explain and agree that work separately. Hardware is not automatically included in a gasket price.
No. Jade covers several cabinet models and layouts. Send the complete product code, serial tag and affected-door photos before a replacement gasket is confirmed.
Manufacturer references support the identification guidance. Instructions and label positions can differ by model; use your appliance’s own manual where it differs. The examples above establish identification details, not parts availability or compatibility for your appliance.
The same supplied-and-fitted service, with model-label help for each brand.
Send a photo or talk it through with us. We’ll help find the right seal and give you a clear, free quote.
Carefully matched. Properly fitted.
