15 years of seal experience
Melbourne-wide fridge & freezer seal replacementTalk to an expert0421 911 222
MODEL & PHOTO GUIDE

Find your fridge model number. Start with two photos.

The model label and a close-up of the seal are a useful start. Tell us your suburb and cabinet type, and we’ll help with any missing details.

See which photos to take Find your brand’s label location
Corner and folds of an intact fridge door seal
A clear view of the seal and corner helps.
No call-out feeThe quoted price includes coming to you
Seal Guarantee6 months household, 3 months commercial
Australian-made sealsMatched to your model
15 years’ experienceThousands of fridges sealed
THE SHORT ANSWER

Where do I find my fridge model number?

Many labels are inside the fridge compartment or around the door opening, but the position changes by brand and model, so find your brand below or check the manual. Photograph the whole label, then send it with a close-up of the seal. No label? A photo of the whole appliance is enough to start.

Quote
Free, from your photos
Call-out fee
None
Written quotes
Matched or beaten
Where
All of Melbourne
LEAVE THE SEAL FITTED

Here’s what to photograph.

  1. The appliance label

    Photograph the whole label so the printed model details can be read. Use good light, take a steady, straight-on picture and check that it is clear before uploading.

    Label locations vary. Check your appliance manual or the manufacturer’s model-location guide. If the label is inaccessible, send a whole-appliance photo instead of moving a heavy cabinet.

    For Samsung models: Samsung Australia’s model-code locator lets you select your fridge type.

  2. The seal and affected corner

    Take a close-up showing the rubber, a corner and any loose, torn or uneven section. Leave the seal in place.

    In your message, say whether it is the fridge door, freezer door, drawer or lid. If the problem is hard to photograph, tell us what happens when you close it.

    Can’t find the label? Start with the whole appliance and the seal. We can help with the next step.

Why the model and the door matter

A fridge and freezer in the same appliance can use different seals. The manufacturer’s part information may also list specific compatible models. Tell us which door needs attention rather than sending dimensions alone.

Example: Fisher & Paykel’s model-specific fridge-door gasket.

MODEL NUMBER LOCATIONS

Find the label for your brand.

Photograph the whole plate, not just the brand badge. The location depends on the model; the manufacturer’s guide takes priority. Do not pull out a heavy appliance, remove covers or dismantle a door to find it.

LG

Use your model’s manual to find the appliance rating label. Photograph the cabinet label rather than relying on an InstaView or Door-in-Door range name.

Keep readable: Complete model and serial number; identify the affected opening.

LG Australia manuals

LG seal guide

Hisense

Location depends on the cabinet. Find the matching manual through Hisense Australia; avoid assuming one position covers every fridge and chest freezer.

Keep readable: Full model and serial number, including every final letter.

Hisense Australia manuals

Hisense seal guide

Haier

Use the matching Resources guide. For example, the HCF101/143/201 chest-freezer manual puts the label at the back; other models may differ.

Keep readable: Model and serial number from the complete serial label.

Haier chest-freezer model manual

Haier seal guide

Kelvinator

Use your appliance manual for the plate location. Kelvinator’s parts guidance explains the model and PNC fields; photograph both on the serial plate.

Keep readable: Model after Mod, PNC after Prod.No, and serial number.

Kelvinator model and PNC guidance

Kelvinator seal guide

Bosch

Use Bosch’s type-plate finder to locate the rating plate for your appliance; positions vary around the door and cabinet.

Keep readable: Complete E-Nr, including the / version, and FD number.

Bosch Australia Service Assistant

SKOPE

Look for the cabinet serial rating label, generally inside toward the top. A separate motor-unit label beginning U or H-U is different.

Keep readable: Cabinet model and serial label, with a whole-cabinet photo.

SKOPE cabinet identification support

SKOPE seal guide

Bromic

The compliance plate can be inside or on the back, depending on the model. Start with accessible internal labels.

Keep readable: Full model and suffix, serial and any separate product number.

Bromic support

Bromic seal guide

No label, or a different brand?

Send the whole appliance and the existing seal. Include any model details you can access safely. A clear photo of the door layout is more useful than guessing a faded number. Photos and model details are optional for the first enquiry.

Start with the photos you have

Manufacturer guidance checked 30 September 2026. Examples establish identification details; they do not confirm a replacement part.

COMMERCIAL CABINETS & COOL ROOMS

Make each cabinet easy to identify.

Several cabinets or doors?

Give each cabinet a simple name, such as “prep fridge”, “drinks display” or “upright freezer”. Match the photos to those names and tell us which doors need seals.

Include your venue, suburb and any access details you would like us to consider. Email extra photographs so each cabinet stays easy to follow.

Commercial seal replacement

Cool-room or freezer-room doors

Start with the whole doorway and a close-up of a seal corner or fixing area. Tell us whether the door is hinged or sliding, and whether it belongs to a cool room or freezer room.

Leave the existing seal in place for the initial photographs. If you also need strip curtains, photograph the mounting rail; for hinges or latches, show the hardware and where it meets the frame.

Cool-room seal replacement
READY WHEN YOU ARE

Send your details. We’ll check the fit.

We check the cabinet and seal details, ask for anything missing and confirm the proposed seals, fitting and price. Seals usually need ordering after the quote is agreed; we confirm the expected lead time before ordering and arrange the visit with you.

Easier to show it on video? Ask for a video quote or support in your message. We can discuss the best way to see the issue, especially if a door moves unevenly or you have several cabinets to explain.

Looking after your seal

Follow the cleaning instructions for your model. If the door is not closing properly, try the simple checks in our troubleshooting guide before assuming it needs a new seal.

Check a door that won’t seal Identify the right seal without guessing
PHOTO GUIDE QUESTIONS

Missing a detail? Start with what you have.

Still not sure?

Send a photo or talk it through. We’ll explain what your door needs.

Can I enquire without the model number?

Yes. Send a picture of the whole appliance and the existing seal instead. Include the brand if you know it. We will let you know if another detail or photograph would help identify the replacement.

Should I remove or measure the seal first?

Leave the existing seal fitted for the first photographs. We can ask for a particular measurement or another view if it is needed. You do not need a seal part number to start an enquiry.

Can you quote for several cabinets?

Yes. Give each cabinet a simple name, match the photographs to those names and state which doors need seals. Email extra photographs with your name, venue and suburb.

Can you help with a video quote?

Yes. Ask for video support when you enquire. Start with your suburb, cabinet type and a description of the problem. We will discuss the best way to review the details, and explain whether more photos or a site check are needed.

Do my photos confirm the part or book an installation?

No. Photos start the enquiry. We check the required seal and agree the quote. Seals usually need ordering, so we confirm the expected lead time before ordering and arrange installation with you.

MODEL & FITTING HELP

A model number is only part of the match.

Some cabinets also need a product number, serial number or a clear view of which door is affected. Our brand and fitting guides explain what to photograph before ordering a replacement.

A PHOTO. A CONVERSATION. A BETTER FIT.

Your fridge.
In expert hands.

Send a photo or talk it through with us. We’ll help find the right seal and give you a clear, free quote.

Carefully matched. Properly fitted.

seal specialist holding a replacement fridge door seal
Call 0421 911 222TextFree quote